DIY Be- You- tiful frame.

Hello beauties!
Its been a while since I did a DIY post but I was so lazy in the past few days that I did not want to try anything but then one day during Ramazan I saw a DIY wall frame made with glitter somewhere on pinterest and I was like I need to try this as soon as possible.

I made a few amendments in the original design as I didn't have all the items needed but I liked how the DIY turned out at the end so here I am sharing my tutorial with you.

Things used:

An empty photo frame

Blank white sheet cut according to the size of frame.

Blank sheet (any color of your choice, I used turquoise to match the theme of my room).

UHU all purpose adhesive (or any glue)

Glitter (any color)

Pen with golden ink.

A pair of Scissors to cut the paper.

Pencil

Scale

Method:
I wrote the words Be- You- tiful on a white sheet in the way I wanted them on my frame.

Then I traced the words on the turquoise paper sheet and wrote Be and TIFUL with the gloden pen.

Then I wrote the word YOU with the UHU tube and sprinkled the glitter over it and then let it dry

After its completely dry I put the sheet in the frame and its done.

I hope you like this DIY its super fun and easy to make.

That's it for today I'll be back soon till then take care..

Bubye

DIY Room Decor- Switchboard Decor

Hello beauties!

Today I am going to share with you a switch board décor DIY. A few months back I decided to redecorate my room and at that time all I used to do was searching for room décor ideas. I saw this DIY on Pinterest and immediately decided to do it but then I got busy and all my room renovation plans got delayed. Now this weekend I finally decided to resume my room décor project and started with decorating the switchboards in my room.

 Actually I am sharing not one but two DIY’sJ.

I decorated two switchboards in my room; first with a simple printed card that I cut from an old calendar and the other one with glitter.

First:

Things needed:

For this I just needed an old calendar with a picture or some print and some glue.

Directions:

1-      I measured the board with a scale and cut the old calendar equal to the size of the board.

2-      Then with a blade I made a hole on that calendar sheet equal to the size of switch/button.

3-      Then I Just pasted the sheet on the switch board with the glue.

4-      And the board is ready.

Second:

Things needed:

For this I needed some glitter and glue. I bought these bottles of glitter from a stationery shop years ago for some crafts but never used them and I also had this UHU glue at home.

Directions:

Its better if you remove the board from the wall and put it on a smooth surface but I did not know how to get it off the wall, I tried but the screws were too stubborn so I gave up and started working while the board was still on the wall.

 For details about how I did this DIY read on the steps:

1-      I just took a small amount of glitter out of the bottle and put it on a piece of paper so I do not need to open and close the bottle again and again.

2-      Then I Applied UHU on a small area of the board with one of my fingers.

3-      Then with another clean finger I pressed some glitter lightly over the area on which I applied glue.

4-      I repeat it on the rest of the board till whole board is covered with glitter.

5-      And the board is ready.

Aren’t these DIY’s really simple and easy to do? What do you think about these?

That’s it for today. I hope you liked this post.

I’ll be back soon till then take care.. bubye J